Inheritance diagram for pflib::uhal::uhalWishboneInterface:

Collaboration diagram for pflib::uhal::uhalWishboneInterface:

Public Member Functions
	uhalWishboneInterface (const std::string &target, const std::string &ipbus_map_path)
	Construct a TCP bridge.

virtual void	wb_write (int target, uint32_t addr, uint32_t data)
	write a 32-bit word to the given target and address More...

virtual uint32_t	wb_read (int target, uint32_t addr)
	read a 32-bit word from the given target and address More...

virtual void	wb_reset ()
	reset the wishbone bus (on/off cycle) More...

virtual void	wb_errors (uint32_t &crcup_errors, uint32_t &crcdn_errors, uint32_t &wb_errors)
	Read the monitoring counters crcup_errors – CRC errors observed on the uplink (wraps) crcdn_errors – CRC errors from the downlink reported on the uplink (wraps) wb_errors – Wishbone errors indicated by the Polarfire. More...

virtual void	wb_clear_counters ()
	Clear the monitoring counters. More...

virtual void	fc_sendL1A ()
	Backend implementation. More...

virtual void	fc_linkreset ()
	send a link reset More...

virtual void	fc_bufferclear ()
	send a single L1A More...

virtual void	fc_calibpulse ()
	send a single calib pulse More...

virtual void	fc_setup_calib (int pulse_len, int l1a_offset)
	calib pulse setup More...

virtual void	fc_get_setup_calib (int &pulse_len, int &l1a_offset)
	calib pulse setup More...

virtual void	fc_read_counters (int &spill_count, int &header_occ, int &header_occ_max, int &event_count, int &vetoed_counter) override
	read counters from the FC side More...

virtual void	fc_clear_run () override
	reset counters for a new run More...

virtual void	fc_advance_l1_fifo () override
	advance the FC fifo More...

virtual void	fc_enables_read (bool &ext_l1a, bool &ext_spill, bool &timer_l1a) override
	check the enables for various trigger/spill sources More...

virtual void	fc_enables (bool ext_l1a, bool ext_spill, bool timer_l1a) override
	set the enables for various trigger/spill sources More...

virtual void	fc_veto_setup_read (bool &veto_daq_busy, bool &veto_l1_occ, int &l1_occ_busy, int &l1_occ_ok) override
	check the setup for various busy/veto More...

virtual void	fc_veto_setup (bool veto_daq_busy, bool veto_l1_occ, int l1_occ_busy, int l1_occ_ok) override
	set the enables for various trigger/spill sources More...

virtual void	daq_reset ()
	reset the daq buffers More...

virtual void	daq_advance_ptr ()
	advance the daq pointer along buffer More...

virtual void	daq_status (bool &full, bool &empty, int &nevents, int &next_event_size)
	readout the daq status into the passed variables More...

virtual std::vector< uint32_t >	daq_read_event ()
	read the aquired event and return it More...

Public Member Functions inherited from pflib::Backend
virtual int	fc_timer_setup_read ()
	get the period in us for the timer trigger More...

virtual void	fc_timer_setup (int usdelay)
	set the period in us for the timer trigger More...

virtual void	daq_setup_event_tag (int run, int day, int month, int hour, int min)
	Set the event tagging information. More...

Private Member Functions
void	dispatch ()

Private Attributes
std::unique_ptr<::uhal::HwInterface >	hw_

Member Function Documentation

◆ daq_advance_ptr()

void pflib::uhal::uhalWishboneInterface::daq_advance_ptr ( )

virtual

advance the daq pointer along buffer

Implements pflib::Backend.

◆ daq_read_event()

std::vector< uint32_t > pflib::uhal::uhalWishboneInterface::daq_read_event ( )

virtual

read the aquired event and return it

Implements pflib::Backend.

◆ daq_reset()

void pflib::uhal::uhalWishboneInterface::daq_reset ( )

virtual

reset the daq buffers

Implements pflib::Backend.

◆ daq_status()

void pflib::uhal::uhalWishboneInterface::daq_status	(	bool &	full,
		bool &	empty,
		int &	nevents,
		int &	next_event_size
	)

virtual

readout the daq status into the passed variables

Implements pflib::Backend.

◆ fc_advance_l1_fifo()

void pflib::uhal::uhalWishboneInterface::fc_advance_l1_fifo ( )

overridevirtual

advance the FC fifo

Reimplemented from pflib::Backend.

◆ fc_bufferclear()

void pflib::uhal::uhalWishboneInterface::fc_bufferclear ( )

virtual

send a single L1A

Implements pflib::Backend.

◆ fc_calibpulse()

void pflib::uhal::uhalWishboneInterface::fc_calibpulse ( )

virtual

send a single calib pulse

Implements pflib::Backend.

◆ fc_clear_run()

void pflib::uhal::uhalWishboneInterface::fc_clear_run ( )

overridevirtual

reset counters for a new run

Reimplemented from pflib::Backend.

◆ fc_enables()

void pflib::uhal::uhalWishboneInterface::fc_enables	(	bool	ext_l1a,
		bool	ext_spill,
		bool	timer_l1a
	)

overridevirtual

set the enables for various trigger/spill sources

Reimplemented from pflib::Backend.

◆ fc_enables_read()

void pflib::uhal::uhalWishboneInterface::fc_enables_read	(	bool &	ext_l1a,
		bool &	ext_spill,
		bool &	timer_l1a
	)

overridevirtual

check the enables for various trigger/spill sources

Reimplemented from pflib::Backend.

◆ fc_get_setup_calib()

void pflib::uhal::uhalWishboneInterface::fc_get_setup_calib	(	int &	pulse_len,
		int &	l1a_offset
	)

virtual

calib pulse setup

Implements pflib::Backend.

◆ fc_linkreset()

void pflib::uhal::uhalWishboneInterface::fc_linkreset ( )

virtual

send a link reset

Implements pflib::Backend.

◆ fc_read_counters()

void pflib::uhal::uhalWishboneInterface::fc_read_counters	(	int &	spill_count,
		int &	header_occ,
		int &	header_occ_max,
		int &	event_count,
		int &	vetoed_counter
	)

overridevirtual

read counters from the FC side

Reimplemented from pflib::Backend.

◆ fc_sendL1A()

void pflib::uhal::uhalWishboneInterface::fc_sendL1A ( )

virtual

Backend implementation.

Implements pflib::Backend.

◆ fc_setup_calib()

void pflib::uhal::uhalWishboneInterface::fc_setup_calib	(	int	pulse_len,
		int	l1a_offset
	)

virtual

calib pulse setup

Implements pflib::Backend.

◆ fc_veto_setup()

void pflib::uhal::uhalWishboneInterface::fc_veto_setup	(	bool	veto_daq_busy,
		bool	veto_l1_occ,
		int	l1_occ_busy,
		int	l1_occ_ok
	)

overridevirtual

set the enables for various trigger/spill sources

Reimplemented from pflib::Backend.

◆ fc_veto_setup_read()

void pflib::uhal::uhalWishboneInterface::fc_veto_setup_read	(	bool &	veto_daq_busy,
		bool &	veto_l1_occ,
		int &	l1_occ_busy,
		int &	l1_occ_ok
	)

overridevirtual

check the setup for various busy/veto

Reimplemented from pflib::Backend.

◆ wb_clear_counters()

void pflib::uhal::uhalWishboneInterface::wb_clear_counters ( )

virtual

Clear the monitoring counters.

Implements pflib::WishboneInterface.

◆ wb_errors()

void pflib::uhal::uhalWishboneInterface::wb_errors	(	uint32_t &	crcup_errors,
		uint32_t &	crcdn_errors,
		uint32_t &	wb_errors
	)

virtual

Read the monitoring counters crcup_errors – CRC errors observed on the uplink (wraps) crcdn_errors – CRC errors from the downlink reported on the uplink (wraps) wb_errors – Wishbone errors indicated by the Polarfire.

Implements pflib::WishboneInterface.

◆ wb_read()

uint32_t pflib::uhal::uhalWishboneInterface::wb_read	(	int	target,
		uint32_t	addr
	)

virtual

read a 32-bit word from the given target and address

Exceptions

pflib::Exception in the case of a timeout or wishbone error

Implements pflib::WishboneInterface.

◆ wb_reset()

void pflib::uhal::uhalWishboneInterface::wb_reset ( )

virtual

reset the wishbone bus (on/off cycle)

Implements pflib::WishboneInterface.

◆ wb_write()

void pflib::uhal::uhalWishboneInterface::wb_write	(	int	target,
		uint32_t	addr,
		uint32_t	data
	)

virtual

write a 32-bit word to the given target and address

Exceptions

pflib::Exception in the case of a timeout or wishbone error

Implements pflib::WishboneInterface.

The documentation for this class was generated from the following files:

include/pflib/uhal/uhalWishboneInterface.h
src/pflib/uhal/uhalWishboneInterface.cxx

Public Member Functions

Private Member Functions

Private Attributes

Member Function Documentation

◆ daq_advance_ptr()

◆ daq_read_event()

◆ daq_reset()

◆ daq_status()

◆ fc_advance_l1_fifo()

◆ fc_bufferclear()

◆ fc_calibpulse()

◆ fc_clear_run()

◆ fc_enables()

◆ fc_enables_read()

◆ fc_get_setup_calib()

◆ fc_linkreset()

◆ fc_read_counters()

◆ fc_sendL1A()

◆ fc_setup_calib()

◆ fc_veto_setup()

◆ fc_veto_setup_read()

◆ wb_clear_counters()

◆ wb_errors()

◆ wb_read()

◆ wb_reset()

◆ wb_write()