Quick start

ACTS is developed in C++ and is built using CMake. Building the core library requires a C++17 compatible compiler, Boost, and Eigen. The following commands will clone the repository, configure, and build the core library:

$ git clone https://github.com/acts-project/acts <source>

$ cmake -B <build> -S <source>

$ cmake --build <build>

For a full list of dependencies, including specific versions, see the Prerequisites section below. Build options to activate additional components are described in the Build options section.

Prerequisites

The following dependencies are required to build the ACTS core library:

A C++17 compatible compiler (recent versions of either gcc and clang should work)
CMake >= 3.14
Boost >= 1.71 with filesystem, program_options, and unit_test_framework
Eigen >= 3.3.7

The following dependencies are optional and are needed to build additional components:

CUDA for the CUDA plugin and the Exa.TrkX plugin and its examples
DD4hep >= 1.11 for the DD4hep plugin and some examples
Doxygen >= 1.8.15 for the documentation
Geant4 for some examples
HepMC >= 3.2.1 for some examples
Intel Threading Building Blocks >= 2020.1 for the examples
ONNX Runtime >= 1.12.0 for the ONNX plugin, the Exa.TrkX plugin and some examples
Pythia8 for some examples
ROOT >= 6.20 for the TGeo plugin and the examples
Sphinx >= 2.0 with Breathe, Exhale, and recommonmark extensions for the documentation
cugraph for the Exa.TrkX plugin
libtorch for the Exa.TrkX plugin
Pybind11 for the Python bindings of the examples

There are some additional dependencies that are automatically provided as part of the build system. These are usually not available through the system package manager and can be found in the thirdparty directory.

All external dependencies must be provided prior to building ACTS. Compatible versions of all dependencies are provided e.g. by the LCG releases starting from LCG 102b. For convenience, it is possible to build the required boost and eigen3 dependencies using the ACTS build system; see Build options. Other options are also available and are discussed in the Building Acts section.

Profiling details the prerequisites for profiling the ACTS project with gperftools.

Building ACTS

ACTS uses CMake to configure, build, and install the software. After checking out the repository code into a <source> directory, CMake is called first to configure the build into a separate <build> directory. A typical setup is to create a <source>/build directory within the sources, but this is just a convention; not a requirement. The following command runs the configuration and searches for the dependencies. The <build> directory is automatically created.

$ cmake -B <build> -S <source>

The build can be configured via various options that are listed in detail in the Build options section. Options are set on the command line. The previous command could be e.g. modified to

$ cmake -B <build> -S <source> -DACTS_BUILD_UNITTESTS=on -DACTS_BUILD_FATRAS=on

After the configuration succeeded, the software is build. This is also done with cmake via the following command

$ cmake --build <build>

This automatically calls the configure build tool, e.g. Make or Ninja. To build only a specific target, the target names has to be separated from the CMake options by --, i.e.

$ cmake --build <build> -- ActsFatras # to build the Fatras library

The build commands are the same regardless of where you are building the software. Depending on your build environment, there are different ways how to make the dependencies available.

With a LCG release on CVMFS

If you have access to a machine running CVMFS, e.g. CERNs lxplus login machines, the dependencies can be easily satisfied via a LCG releases available through CVMFS. A setup script is provided to activate a compatible releases that can be used as follows:

$ cd <source>

$ source CI/setup_cvmfs_lcg.sh

After sourcing the setup script, you can build ACTS as described above. The following commands will build ACTS in the <source>/build directory with the Fatras component.

$ cd <source>

$ source CI/setup_cvmfs_lcg.sh

$ cmake -B build -S . -DACTS_BUILD_FATRAS=on

$ cmake --build build

In a container

A set of container images is available through the ACTS container registry. The following containers are used as part of the continuous integration setup and come with all dependencies pre-installed.

ubuntu2204
ubuntu2404

Furthermore, we are also testing on, but do not provide the corresponding containers:

alma9 (HEP-specific software from LCG 104 or 105 and gcc13 or clang16)
macOS-10.15

:::{attention} We stopped producing fully-contained LCG containers in favor of running LCG based tests directly from CVMFS. :::

To use these locally, you first need to pull the relevant images from the registry. Stable versions are tagged as vX where X is the version number. The latest, potentially unstable, version is tagged as latest. To list all available tags, e.g. for the ubuntu2004 image, you can use the following command:

$ docker search --list-tags ghcr.io/acts-project/ubuntu2404

The following command then downloads a stable tag of the ubuntu2404 image:

$ docker pull ghcr.io/acts-project/ubuntu2404:51

This should print the image id as part of the output. You can also find out the image id by running docker images to list all your locally available container images.

Now, you need to start a shell within the container to run the build. Assuming that <source> is the path to your source checkout on your host machine, the following command will make the source directory available as /acts in the container and start an interactive bash shell

$ docker run --volume=<source>:/acts:ro --interactive --tty <image> /bin/bash

where <image> is the image id that was previously mentioned. If you are using the Ubuntu-based image you are already good to go. For the images based on LCG releases, you can now activate the LCG release in the container shell by sourcing a setup script:

container $ source /opt/lcg_view/setup.sh

Building ACTS follows the instructions above with /acts as the source directory, e.g.

container $ cmake -B build -S /acts -DACTS_BUILD_FATRAS=on

container $ cmake --build build

On your local machine

Building and running ACTS on your local machine is not officially supported. However, if you have the necessary prerequisites installed it is possible to use it locally. ACTS developers regularly use different Linux distributions and macOS to build and develop ACTS.

(build_docs)=

Building the documentation

The documentation uses Doxygen to extract the source code documentation and Sphinx with the Breathe extension to generate the documentation website. To build the documentation locally, you need to have Doxygen version 1.9.5 or newer installed. Sphinx and a few other dependencies can be installed using the Python package manager pip:

$ cd <source>

$ pip install -r docs/requirements.txt

:::{tip} It is strongly recommended to use a virtual environment for this purpose! For example, run

$ python -m venv docvenv

$ source docvenv/bin/activate

to create a local virtual environment, and then run the pip command above. :::

To activate the documentation build targets, the ACTS_BUILD_DOCS option has to be set

$ cmake -B <build> -S <source> -DACTS_BUILD_DOCS=on

Then the documentation can be build with this target

$ cmake --build <build> --target docs

The default option includes the Doxygen, Sphinx, and the Breathe extension, i.e. the source code information can be used in the manually written documentation. An attempt is made to pull in symbols that are cross-referenced from other parts of the documentation. This is not guaranteed to work: in case of errors you will need to manually pull in symbols to be documented.

Build options

CMake options can be set by adding -D<OPTION>=<VALUE> to the configuration command. The following command would e.g. enable the unit tests

$ cmake -B <build> -S <source> -DACTS_BUILD_UNITTESTS=ON

Multiple options can be given. cmake caches the options so that only changed options must be specified in subsequent calls to configure the project. The following options are available to configure the project and enable optional components.

Option	Description
ACTS_BUILD_EVERYTHING	Build with most options enabled (except HepMC3 and documentation) type: `bool`, default: `OFF`
ACTS_PARAMETER_DEFINITIONS_HEADER	Use a different (track) parameter definitions header type: `filepath`, default: `""`
ACTS_SOURCELINK_SBO_SIZE	Customize the SBO size used by SourceLink type: `string`, default: `""`
ACTS_FORCE_ASSERTIONS	Force assertions regardless of build type type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_LIBS	Use system libraries by default type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_ACTSVG	Use the ActSVG system library type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_BUILD_PLUGIN_ACTSVG	Build SVG display plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_CUDA	Build CUDA plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_DD4HEP	Build DD4hep plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_PODIO	Build Podio plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_EDM4HEP	Build EDM4hep plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_FPEMON	Build FPE monitoring plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_GEOMODEL	Build GeoModel plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_COVFIE	Build Covfie plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_DETRAY	Build Detray plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_TRACCC	Build Traccc plugin type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_GEOMODEL	Use a system-provided GeoModel installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_BUILD_PLUGIN_GEANT4	Build Geant4 plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_EXATRKX	Build the Exa.TrkX plugin type: `bool`, default: `OFF`
ACTS_EXATRKX_ENABLE_ONNX	Build the Onnx backend for the exatrkx plugin type: `bool`, default: `OFF`
ACTS_EXATRKX_ENABLE_TORCH	Build the torchscript backend for the exatrkx plugin type: `bool`, default: `ON`
ACTS_EXATRKX_ENABLE_CUDA	Enable CUDA for the exatrkx plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_JSON	Build json plugin type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_NLOHMANN_JSON	Use nlohmann::json provided by the system instead of the bundled version type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_BUILD_PLUGIN_LEGACY	Build legacy plugin type: `bool`, default: `OFF`
ACTS_BUILD_PLUGIN_ONNX	Build ONNX plugin type: `bool`, default: `OFF`
ACTS_SETUP_COVFIE	Explicitly set up covfie for the project type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_COVFIE	Use a system-provided covfie installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_SETUP_DETRAY	Explicitly set up detray for the project type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_DETRAY	Use a system-provided detray installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_SETUP_TRACCC	Explicitly set up traccc for the project type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_TRACCC	Use a system-provided traccc installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_SETUP_DFELIBS	Explicitly set up dfelibs for the project type: `bool`, default: `ON`
ACTS_USE_SYSTEM_DFELIBS	Use a system-provided dfelibs installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_SETUP_VECMEM	Explicitly set up vecmem for the project type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_VECMEM	Use a system-provided vecmem installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_SETUP_ALGEBRAPLUGINS	Explicitly set up algebra-plugins for the project type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_ALGEBRAPLUGINS	Use a system-provided algebra-plugins installation type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_BUILD_PLUGIN_TGEO	Build TGeo plugin type: `bool`, default: `OFF`
ACTS_BUILD_FATRAS	Build FAst TRAcking Simulation package type: `bool`, default: `OFF`
ACTS_BUILD_FATRAS_GEANT4	Build Geant4 Fatras package type: `bool`, default: `OFF`
ACTS_BUILD_ALIGNMENT	Build Alignment package type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES	Build standalone examples type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_DD4HEP	Build DD4hep-based code in the examples type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_EDM4HEP	Build EDM4hep-based code in the examples type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_EXATRKX	Build the Exa.TrkX example code type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_GEANT4	Build Geant4-based code in the examples type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_HEPMC3	Build HepMC3-based code in the examples type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_PYTHIA8	Build Pythia8-based code in the examples type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_PYTHON_BINDINGS	Build python bindings for the examples type: `bool`, default: `OFF`
ACTS_USE_SYSTEM_PYBIND11	Use a system installation of pybind11 type: `bool`, default: `ACTS_USE_SYSTEM_LIBS -> OFF`
ACTS_USE_EXAMPLES_TBB	Use Threading Building Blocks library in the examples type: `bool`, default: `ON`
ACTS_BUILD_ANALYSIS_APPS	Build Analysis applications in the examples type: `bool`, default: `OFF`
ACTS_BUILD_BENCHMARKS	Build benchmarks type: `bool`, default: `OFF`
ACTS_BUILD_INTEGRATIONTESTS	Build integration tests type: `bool`, default: `OFF`
ACTS_BUILD_UNITTESTS	Build unit tests type: `bool`, default: `OFF`
ACTS_BUILD_EXAMPLES_UNITTESTS	Build unit tests type: `bool`, default: `ACTS_BUILD_UNITTESTS AND ACTS_BUILD_EXAMPLES`
ACTS_BUILD_NONCOMPILE_TESTS	Build tests that check build failure invariants type: `bool`, default: `OFF`
ACTS_RUN_CLANG_TIDY	Run clang-tidy static analysis type: `bool`, default: `OFF`
ACTS_BUILD_DOCS	Build documentation type: `bool`, default: `OFF`
ACTS_SETUP_BOOST	Explicitly set up Boost for the project type: `bool`, default: `ON`
ACTS_USE_SYSTEM_BOOST	Use a system-provided boost type: `bool`, default: `ON`
ACTS_SETUP_EIGEN3	Explicitly set up Eigen3 for the project type: `bool`, default: `ON`
ACTS_USE_SYSTEM_EIGEN3	Use a system-provided eigen3 type: `bool`, default: `ON`
ACTS_BUILD_ODD	Build the OpenDataDetector type: `bool`, default: `OFF`
ACTS_ENABLE_CPU_PROFILING	Enable CPU profiling using gperftools type: `bool`, default: `OFF`
ACTS_ENABLE_MEMORY_PROFILING	Enable memory profiling using gperftools type: `bool`, default: `OFF`
ACTS_GPERF_INSTALL_DIR	Hint to help find gperf if profiling is enabled type: `string`, default: `""`
ACTS_ENABLE_LOG_FAILURE_THRESHOLD	Enable failing on log messages with level above certain threshold type: `bool`, default: `OFF`
ACTS_LOG_FAILURE_THRESHOLD	Log level above which an exception should be automatically thrown. If ACTS_ENABLE_LOG_FAILURE_THRESHOLD is set and this is unset, this will enable a runtime check of the log level. type: `string`, default: `""`

All ACTS-specific options are disabled or empty by default and must be specifically requested. Some of the options have interdependencies that are automatically handled, e.g. enabling any of the specific ACTS_BUILD_EXAMPLES_... options will also enable the overall ACTS_BUILD_EXAMPLES option. You only need to tell the build system what you want and it will figure out the rest.

In addition to the ACTS-specific options, many generic options are available that modify various aspects of the build. The following options are some of the most common ones. For more details, have a look at the annotated list of useful CMake variables or at the CMake documentation.

Option	Description
CMAKE_BUILD_TYPE	Build type, e.g. Debug or Release; affects compiler flags (if not specified `RelWithDebInfo` will be used as a default)
CMAKE_CXX_COMPILER	Which C++ compiler to use, e.g. g++ or clang++
CMAKE_INSTALL_PREFIX	Where to install ACTS to
CMAKE_PREFIX_PATH	Search path for external packages

The build is also affected by some environment variables. They can be set by prepending them to the configuration call:

$ DD4hep_DIR=<path/to/dd4hep> cmake -B <build> -S <source>

The following environment variables might be useful.

Environment variable	Description
DD4hep_DIR	Search path for the DD4hep installation
HepMC3_DIR	Search path for the HepMC3 installation
Pythia8_DIR	Search path for the Pythia8 installation

The OpenDataDetector

ACTS comes packaged with a detector modeled using DD4hep that can be used to test your algorithms. It comes equipped with a magnetic field file as well as an already built material map. It is available via the git submodule feature by performing the following steps (git lfs need to be installed on your machine):

$ git submodule init

$ git submodule update

To use it, you will then need to build ACTS with the ACTS_BUILD_ODD option and then point either LD_LIBRARY_PATH on Linux or DYLD_LIBRARY_PATH and DD4HEP_LIBRARY_PATH on MacOs to the install path of the ODD factory (for example: build/thirdparty/OpenDataDetector/factory).

You can now use the ODD in the python binding by using:

oddMaterialDeco = acts.IMaterialDecorator.fromFile("PATH_TO_Acts/thirdparty/OpenDataDetector/data/odd-material-maps.root")

detector, trackingGeometry, decorators = getOpenDataDetector(oddMaterialDeco)

Using ACTS

When using ACTS in your own CMake-based project, you need to include the following lines in your CMakeLists.txt file:

find_package (Acts COMPONENTS comp1 comp2 ...)

where compX are the required components from the ACTS project. See the cmake output for more information about which components are available.