|
LDMX Software
|
Tables for EcalDetectorMap.esa26(), ECal layers 2 and 3 of the ESA 2026 cosmic stand (one HD module per layer, module 0).
layer_map.csv: L2 is optical link 2 (layer 2), L3 is link 3 (layer 3), the fiber of the ECONDDecoder.motherboard_map.csv: ECON-D eRx (POLARFIRE_ELINK) to HGCROC and half. Measured on run 209: the mean SOI ADC of each eRx matches exactly one ROC half of the pflib decoding. L2 (type 2) reads 12 eRx, L3 (type 3) reads ROC0, 2, 3 in 6 eRx. L3 uses logical ROC IDs 10 + ROC, so its channels can map to other cells than the same L2 channels (the IDs only join the two tables).cell_map.csv: HGCROC channel to module cell, from cosmic muons (runs 255, 271-273, HCal trigger):
hd_pad_to_channel_mapping_V2p1, with pflib ROC 0, 1, 2, 3, 4, 5 on hexaboard ASIC 0, 2, 4, 1, 3, 5 (same in both layers);flip_x to the module cell frame, nearest cell (largest offset 1.3 mm). L3 cells are taken relative to the L3 layer center of ldmx-esa-cosmic26-v2, which sits +8.79 mm (x) and +0.29 mm (y) from L2: the stand has no designed odd-layer shift, the geometry's layer shift carries the L3 position from muons (13.6 mm board displacement minus the half cell the flip moves the grid).With this map 71% of the L2-L3 muon pairs are in the same or a neighboring cell (provisional map: 3%). Generator and validation: work/ecal-map26 (make_map26.py, README there).
The EcalReconConditions (pedestals, gains) live in conditions-data under Ecal/esa26, loaded by LDMX.Ecal.esa26_conditions.esa26_recon_conditions().
Open: the module center from the tracks differs from the v2 geometry by about -99 mm in x and +65 mm in y; it depends on the provisional HCal conventions (front at -y, planes 6 and 8).